Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 66 van 134
66
Both the Power and Link LED indicators begin to ash.
After both LED indicators stop ashing, the unit will be reset.
6. Repeat the process for each unit.
Resetting Using Front-panel Buttons
1. Press and hold the minus button on the front panel during power-up until both Power
LED and Link LED start ashing.
2. Power cycle the unit to complete the factory reset process, which turns on AutoIP.
Rebooting
The 4K Ultra HD HDMI & USB-C KVM over IP Sender or Receiver unit can be rebooted in
two ways: Using the Web interface or simply disconnecting and reconnecting the power.
To reboot using the web interface:
1. Access the Web interface for the Sender/Receiver unit.
2. Log in as “Administrator.”
3. Click the System tab.
4. Click the Utilities rollout.
5. Click the Reboot button.
After a few moments, the Power LED indicator will ash. Several seconds later, the
Power LED indicator will glow solid blue and the Link LED indicator will begin to
ash. After both LED indicators stop ashing, the reboot process will be complete.
Utilities
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
