Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 30 van 134
30
Enabling & Disabling HDCP
HDCP-encrypted content can be allowed to pass through or blocked using the HDCP
Enable option on the Receiver unit. Note that disabling the HDCP Enable option does
not decrypt HDCP content.
1. Access the Web interface of a Sender unit.
2. Log in as “Administrator,” then click the Functions tab.
3. Under the Video over IP window group, check the Enable HDCP box to allow
HDCP content to be passed to each Receiver unit. Deselect this box to block HDCP
content from being transmitted to each Receiver unit.
4. Click the Apply button within the Video over IP group.
5. Click the Reboot button at the bottom of the page.
6. Repeat steps 1 through 5 for each Sender unit in the system. This can also be
congured using Gefen’s Matrix Controller (GF-AVIP-MC).
Setting Video Timings
1. Access the Web interface of a Receiver unit.
2. Log in as “Administrator.”
3. Click the Functions tab.
4. Under the Video over IP window group, click the radio button of the desired timing
mode.
• Passthrough is default setting. The output resolution will be the same as the input
resolution.
• Selecting the Native option will determine (scale) the output resolution, based on
capability of display.
Blocking & Masking Video
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
