Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 27 van 134
27
Video Routing
In order for a Sender and Receiver unit to communicate with one another, they must both
be set to the same video channel. This is similar to changing the channel on a set-top
box in order to view a different program. Pressing and releasing either the CH+ or CH-
buttons on the front of the Receiver unit can also be used to change the video channel.
Both methods will be covered in this section. By default, all Sender and Receiver units
are set to channel 0 (zero).
Setting the Channel Using the Web Interface
1. Access the Web interface by entering the IP address of the desired Sender unit.
2. Log in as “Administrator” or “User.”
3. Click the Functions tab. The current channel is displayed within the Channel Setup
window group.
4. Type the desired channel number. Channel numbers can range from 0 to 39900.
5. Click the Apply button on the right-hand side of Channel Setup window group.
The following message will be displayed, at the top of the page, indicating that the
selected channel has been applied.
If the entered value is invalid, then the following message will be displayed:
6. Access the Web interface of Receiver by entering its IP address.
7. Repeat steps 1 - 5 for each Sender and Receiver to be changed.
Video Routing
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
