Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 118 van 134
118
#set_tx_channel
Sets the video channel for the Sender unit. This command is only available when
connected to the Sender unit.
Syntax
#set_tx_channel param1
Parameters
param1 Integer [0...255]
Example
#set_tx_channel 1
TRANSMITTER CHANNEL SET TO 1
Related Commands
#get_tx_channel
#get_rx_channel
r
#set_udp_access
Enables or disables UDP access. After executing this command, the unit must be
rebooted to apply the changes.
Syntax
#set_udp_access param1
Parameters
param1 Integer [0...1]
param1 Description
0 Disabled
1 Enabled
Example
#set_udp_access 0
UDP ACCESS SET TO DISABLED
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_remote_udp_access
#get_remote_udp_ip
#get_remote_udp_port
#get_udp_access
#get_udp_port
#set_remote_udp_access
#set_remote_udp_ip
#set_remote_udp_port
#set_udp_port
Command Parameters
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
