Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 114 van 134
114
#set_serial_parity
Sets the parity bit for the serial port. After executing this command, the unit must be
rebooted to apply the changes.
Syntax
#set_serial_parity param1
Parameters
param1 Integer [0...2]
param1 Description
0 None
1 Odd
2 Even
Example
#set_serial_parity 0
SERIAL PARITY MODE SET TO NONE
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_serial_allow
#get_serial_baud
#get_serial_bits
#get_serial_parity
#get_serial_stop
#set_serial_allow
#set_serial_baud
#set_serial_bits
#set_serial_stop
#set_serial_stop
Sets the number of stop bits for the serial port. After executing this command, the unit
must be rebooted to apply the changes.
Syntax
#set_serial_stop param1
Parameters
param1 Integer [0...1]
param1 Description (stop bits)
0 1
1 2
Example
#set_serial_stop 0
SERIAL STOP BITS SET TO 1
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_serial_allow
#get_serial_baud
#get_serial_bits
#get_serial_parity
#get_serial_stop
#set_serial_allow
#set_serial_baud
#set_serial_bits
#set_serial_parity
Command Parameters
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
