Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 104 van 134
104
#set_gateway
Sets the gateway address. This command is only applicable when using Static IP mode.
param1 must be specied using dot-decimal notation. After executing this command, the
unit must be rebooted to apply the changes.
Syntax
#set_gateway param1
Parameters
#set_gateway param1 IP Address
Example
#set_gateway 192.168.1.1
GATEWAY ADDRESS SET TO 192.168.1.1
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_gateway
#get_ip_address
#get_ip_mode
#get_ipcong
#get_netmask
#get_web_port
#set_ip_address
#set_ip_mode
#set_netmask
#set_web_port
#set_hdcp_allow
Blocks or unblocks HDCP-encrypted sources. This command does not decrypt HDCP
content and is only available when connected to a Sender unit. After executing this
command, the unit must be rebooted to apply the changes.
Syntax
#set_hdcp_allow param1
Parameters
param1 Integer [0...1]
param1 Description
0 Disabled
1 Enabled
Example
#set_hdcp_allow 1
HDCP ENCRYPTED SOURCE SET TO ENABLED
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_hdcp_allow
Command Parameters
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
