Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 103 van 134
103
Command Parameters
#set_edid_copy
Enables or disables the EDID copy state. When param1 = 1, the downstream EDID
(connected to the Receiver unit) is copied to the Sender unit. If param1 = 0, then the
internal (default) EDID is used. This command is available only when connected to a
Receiver unit. After executing this command, the unit must be rebooted to apply the
changes.
Syntax
#set_edid_copy param1
Parameters
param1 Integer [0...1]
param1 Description
0 Off
1 On
Example
#set_edid_copy 1
COPY EDID OF CONNECTED DISPLAY SET TO ENABLED
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_edid_copy
#set_fp_timeout
Displays the front panel LED/LCM timeout.
Syntax
#set_fp_timeout param1
Parameters
param1 Integer [0...60]
param1 Description
0 Disabled
1-60 Seconds
Example
#set_fp_timeout 10
FP_TIMEOUT 10
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
