Gefen EXT-4K600A-MF-51 handleiding

80 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 4 van 80
iv
Contacting Gefen Technical Support
Operating Notes
When using the 5x1 Scaler for the rst time, it is recommended that the unit be congured
using the web interface. Firmware update is handled through Gefen Syner-G Software Suite.
Download the application at: http://www.gefen.com/synerg/
It is recommended that a power cycle be performed after upgrading rmware on this product.
This manual has been written and is based on rmware version 3.57.
This product supports 2 Channels of LPCM audio only.
This product will accept full bandwidth 4K Ultra HD (3840 x 2160 @ 60 Hz 4:4:4) from the HDMI
and DisplayPort™ inputs, however due to bandwidth limitations over the HDBaseT™ link the
output resolution can be scaled to a maximum of 3840 x 2160 @ 30 Hz 4:4:4.
Automatic switching is not available for the VGA input when set to composite or component
video modes.
The HDBaseT™ link is not active when the unit is in standby mode. This means that the unit
cannot be powered on with the IR remote control from the IR input on a remote HDBaseT™
Receiver unit. The IR remote control is fully functional when communicating directly with the
main unit.
CEC is only supported on the local HDMI output.
This unit is compatible with the EXTUHDA-HBTL-RX HDBaseT™ receiver available from Gefen
(Sold separately)
It is highly recommended to disable ECHO when controlling a serial (RS-232) device from a
remote receiver. This setting can be changed with the command #SET_ECHO (pg. 50) using
the RS-232 or IP Control interface.
Technical Support
1-707-283-5900 1-800-472-5555
8:00 AM to 5:00 PM Monday - Friday, Pacic Time
Email
support@gefen.com
Web
http://www.gefen.com
Mailing Address
Gefen
Nortek Security & Control, LLC
c/o Customer Service
5919 Sea Otter Place, Suite 100
Carlsbad, CA 92010 USA
© 2019 Nortek Security & Control, LLC. All Rights Reserved.
All trademarks are the property of their respective owners.
Gefen and Nortek Security & Control, LLC reserve the right to make changes in the
hardware, packaging, and any accompanying documentation without prior notice.
Operating Notes

Bekijk gratis de handleiding van Gefen EXT-4K600A-MF-51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkGefen
ModelEXT-4K600A-MF-51
CategorieNiet gecategoriseerd
TaalNederlands
Grootte8591 MB