Gefen EXT-4K600A-MF-51 handleiding
Handleiding
Je bekijkt pagina 23 van 80
page | 13
Front Panel Controls
Powering the Multi-Format Scaler
1. Make sure the included 12V DC power supply is connected from the Multi-Format
Scaler to an available electrical outlet.
2. Press and release the Power button on the front panel.
3. The power button will illuminate blue.
Selecting a Video Input
The Multi-Format Scaler allows you to switch between ve simultaneous connections. By
default, AUTO is active, as well as the auto-detected Input.
Press the button corresponding to your desired Input. The selected button will illuminate
blue.
Select from the following inputs: AUTO, HDMI (1-2-3), DisplayPort and VGA.
4K Ultra HD Multi-Format 5x1 Scaler w/ Auto-Switching & HDBaseT™ Output
DisplayPort™
Power
Auto
VGAIR
HDMI
HDMI
HDMI
1
2
3
4 5
EXT-4K600A-MF-51-HBTLS
Power On
NOTE: The Multi-Format Scaler can also be turned on and off with
the IR Remote Control, the Web Interface, or by an external controller
using either RS-232 or IP Telnet control.
ii
NOTE: The Video Input Selection can also be changed with the IR
Remote Control, the Web Interface, or by an external controller using
either RS-232 or IP Telnet control, or via the Contact Closure Inputs
on the back panel.
ii
4K Ultra HD Multi-Format 5x1 Scaler w/ Auto-Switching & HDBaseT™ Output
DisplayPort™
Power
Auto
VGAIR
HDMI
HDMI
HDMI
1
2
3
4 5
EXT-4K600A-MF-51-HBTLS
Auto On HDMI 1 Detected
Selecting an Audio Input
Audio inputs must be selected and/or paired with video inputs using the built-in Web
interface or On Screen Display (OSD). See Setup ► Audio (page 31) for more information.
Bekijk gratis de handleiding van Gefen EXT-4K600A-MF-51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | EXT-4K600A-MF-51 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8591 MB |
