Handleiding
Je bekijkt pagina 4 van 36
4 49-5000913 Rev. 1
Features and appearance will vary.
Lights next to the buttons on the air conditioner control panel indicate the selected settings.
A. Control Panel Display
Displays the Set Temperature in degrees Fahrenheit,
degrees Celsius, or the hours remaining in a
Time Delay.
B. Power Button
Turns the air conditioner on or off.
NOTE: Turning off power by pressing the Power
button does NOT disconnect the appliance from the
power supply.
Press the Power Button. The power indicator and
Temperature display will illuminate. Select desired
settings. After one minute, the display lights will turn
off. Press any button on the unit or the remote, the
display will illuminate. Then press corresponding
buttons to change unit function.
Note: If changing functions from the remote, it may
require multiple presses to synchronize remote to
the unit.
C. Quiet Mode
The QUIET function is used for lowering the fan speed
to the lowest speed in Heat and Cool mode. Quiet
mode will ensure the most quiet mode of operation to
satisfy the set temperature and provide room comfort
in the space to be cooled or heated. It is normal for
the unit to operate for a longer period at lower energy
consumption levels to achieve desired temperature.
Pressing QUIET/MODE/FAN button again will exit the
QUIET function and default to auto speed and cool
mode.
D. Turbo Mode (on some models)
The Turbo function is used for speeding up the air
flow to the highest speed in heating and cooling mode.
Pressing the Turbo button again, Fan button, or Mode
button will exit the Turbo function.
NOTE: Turbo is available in heating or cool mode.
E. Delay Pad
Delay ON – When the air conditioner is off, it can be
set to automatically turn on in 1 to 24 hours at its
previous mode and fan settings.
Delay OFF - When the air conditioner is on, it can be
set to automatically turn off in 1 to 24 hours.
How to set: Press the Delay pad. Each touch of the
increase + / Decrease – pads will set the timer in
1-hour intervals.
To review the remaining time on the Delay timer, press
the Delay pad. Use the Increase + / Decrease – pads
to set a new time if desired.
To cancel the timer, press Decrease – pad until the set
time is “—”or Press the Delay button twice.
F. Temperature Set Controls
Adjusts the Temperature or Hours in Time Delay.
To Set the Temperature:
Press the Mode button until the Cool mode
is selected.
Press the Increase + or Decrease - buttons to select
the desired temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or Dry mode.
NOTE: The Increase + or Decrease - buttons, when
pressed at the same time, allow you to select between
displaying the temperature in degrees Fahrenheit or
degrees Celsius. Hold the buttons for 5 seconds to
change between F and C.
G. Mode Button
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
Auto (on some models) – The unit will automatically
choose the mode of operation (Cool, Dry, Fan, or
Heat).
Cool – Cools the room to the set temperature
Fan – Circulates the air in the room without cooling
Dry – Reduces the humidity in the room
Heat (on some models) – Heats the room to the set
temperature
G
H
A
B
C E
J
D
F
I
Controls
USING THE AIR CONDITIONER
Bekijk gratis de handleiding van GE Profile PPHH12WWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GE |
| Model | Profile PPHH12WWF |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4342 MB |
