GE Profile CustomStyle PTI22MFMLWW Handleiding (116 Pagina's)

Handleiding

16

Inserting the door panels.

Install the Freezer Door Side Trim

Do not remove the protective film on the outside

of the Side Trim until the Side Trim is installed.

Fit the top of the freezer door Side Trim under the

corner of the Top Trim and fit the bottom of the

Side Trim over the Bottom Trim as illustrated.

Attach the Side Trim to the door using the two

screws removed in Step 2. Make sure the Side trim

is fitting correctly and that you are satisfied with

the appearance of all parts before pulling the

blue tape liner.

Holding the trim in place with one hand, gradually

pull the blue tape liner out, perpendicular to the

trim. Pull about 3″ (80 mm) out at a time, pressing

the trim with your hand as the adhesive is exposed.

Install the Refrigerator Door Side Trim

Fit the Side Trim over the ends of the refrigerator

door Top and Bottom Trim as illustrated. Attach

the Side Trim to the door using the two screws

removed in Step 2. Make sure the Side Trim is

fitting correctly and that you are satisfied with

the appearance of all parts before pulling the

two pieces of blue tape liner.

Pull the top blue tape liner up about 3″ (80 mm),

pressing the trim with your hand as the adhesive is

exposed to the door. Then pull the bottom blue

tape liner down about 3″ (80 mm). Follow the tape

with your hand, pressing the trim adhesive against

the door.

Continue pulling the blue tape liner loose,

alternating between the top and bottom and

pressing the Side Trim against the door.

Remove the Protective Film From the Outside of the Side Trim

Consumer Support Troubleshooting Tips

Operating Instructions

Safety InstructionsInstallation InstructionsTroubleshooting Tips Installation Instructions Safety Instructions

Operating Instructions

Bekijk gratis de handleiding van GE Profile CustomStyle PTI22MFMLWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.