Gardena AssistCut handleiding
Handleiding
Je bekijkt pagina 16 van 234
2. OPERATION
DANGER! Risk of physical injury!
Cut injury when the product starts
accidentally.
v Close the handles, lock the blade and
turn off the product before you transport
the product.
To charge the battery [ Fig. A / B ]:
CAUTION!
v Note the mains voltage! The voltage of
the power source must match the voltage
specified on the rating plate of the charger.
The 5 V power supply unit with USB socket is not
included. To use the AssistCut, you need a USB
power supply unit (5 V) with certified / country-
specific standard approvals.
To achieve the full charging speed and shortest
charging time, a 2 A power supply unit is recom-
mended. A USB power supply unit with lower
current will extend the charging time.
The battery is delivered partially charged. To ensure
the full performance of the battery, fully charge the
battery before the first use.
The AssistCut does not function while charging.
1. Open the dust cap
1
.
2. Plug the supplied USB-C charging cable into
the charging socket
X
.
3. Plug the USB-C charging cable into the power
supply unit.
4. Connect the power supply unit into a mains
socket.
The battery is charging. The green LEDs (
«
,
∑
and
€
) indicate the current charging progress.
When the battery is fully charged, all 3 LEDs
(
«
,
∑
and
€
) light up green for at least
5 minutes.
5. Close the dust cap
1
.
When the battery is fully charged, the AssistCut
assists up to 1400 cuts.
Battery charging indicator [ Fig. B ]:
Battery charging indicator during charging:
100 % charged
«
,
∑
and
€
illuminate
67 – 99 % charged
«
and
∑
illuminate,
€
flashes
34 – 66 % charged
«
illuminates,
∑
flashes
0 – 33 % charged
«
flashes
Battery charging indicator during switch on
(for 5 sec.):
67 – 100 % charged
«
,
∑
and
€
illuminate
34 – 66 % charged
«
and
∑
illuminate
2 – 33 % charged
«
illuminates
1 % charged
«
flashes
To switch on / off the AssistCut
[ Fig. C / D / E ]:
To switch on:
The product is provided with 2 safety devices
(ON / OFF switch
2
and interlock
3
) to prevent
the product from being turned on by accident.
1. Grip the AssistCut at the front of the handles
and slide the ON / OFF switch
2
backwards to
the ON position.
(Do not grip the AssistCut towards the back
of the handles or with finger(s) between the
handles).
2. Slide the interlock
3
backwards to an unlocked
position
ß
P1
/
ß
P2
.
The lower handle opens and the AssistCut is
ready for use.
To switch off:
1. Push the handles together and slide the inter-
lock
3
forward to the locked position
ß
P0
.
2. Slide the ON / OFF switch
2
forward to the
OFF position.
If the AssistCut is not used for 6 minutes, it
switches off automatically. To switch it on again,
the ON / OFF switch
2
must first be switched
off and then on again.
If the product got hot during operation, let it cool down
before storage.
Do not overload the product.
Always wear suitable clothing, protective gloves, and
stout shoes.
Do not work on slippy underground.
Be careful when working with the product on a ladder:
Danger of distraction could lead to a fall.
16
EN
GAR_12222-20.960.02_2024-03-20.indb 16GAR_12222-20.960.02_2024-03-20.indb 16 20.03.24 12:0920.03.24 12:09
Bekijk gratis de handleiding van Gardena AssistCut, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gardena |
| Model | AssistCut |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 36226 MB |
Caratteristiche Prodotto
| Kleur handvat | Black, Green |
| Aantal per verpakking | 1 stuk(s) |
| Materiaal mes | Roestvrijstaal |
| Maaimethode | Bypass |
| Materiaal van het handvat | Kunststof |
