Handleiding
Je bekijkt pagina 3 van 6
- 3 -
User Manual
Installation
Please read this manual thoroughly prior to equipment set-up, operation, and maintenance.
This unit is intended for use in a temperature-controlled environment of less than 75 degrees Fahrenheit and
60% relative humidity.
Important!!! Please Read Before Installation:
• After unboxing, the unit must be kept upright for a minimum of 24 hours in its final installation
location before being plugged in. Failure to do so may cause damage to the compressor and will
void the warranty.
• Make sure that the unit has reached the desired temperature before loading the unit with products.
This unit is meant for keeping cold products cold, not chilling warm products.
• Make sure that there is proper ventilation around the unit in the area where it will operate.
• Make sure all accessories are installed (i.e., shelves, shelf clips, casters) before plugging the unit in.
• Do not attempt to remove or repair any component of the unit. Consult an authorized service technician
for servicing/repair.
• Do not hang on doors or sit inside the unit.
• Please read through the manual in its entirety.
• This unit is designed to perform in a temperature-controlled environment at 60% relative humidity. The
unit should be located away from doors, air ducts, and fans that could disrupt airflow and negatively
impact performance.
Cabinet Location Guidelines
• Install the unit on a strong and leveled surface.
- Level the unit by adjusting the screws located on the bottom of the unit.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
• Install the unit in an indoor, well-ventilated area.
- Unit performs more efficiently in a well-ventilated area.
- For best performance, please maintain clearance of 6” on the back of the unit.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
• Avoid installation in a high humidity and/or dusty area.
- Humidity above 60% can cause the unit to rust, collect condensation, and may decrease efficiency.
- Dust collected on the condenser coil will cause the unit to malfunction.
• Select a location away from heat and moisture-generating equipment.
- Ambient temperatures above 75 degrees Fahrenheit may cause the compressor to malfunction.
- For optimal performance, this unit should not be used in environments with ambient temperatures
exceeding 75 degrees Fahrenheit.
- The unit should not be placed in areas with an ambient temperature over 90 degrees Fahrenheit
- Equipment malfunctions due to ambient temperatures above 90 degrees Fahrenheit could void
the warranty.
- Do not install this unit inside a closet or alcove.
Bekijk gratis de handleiding van Galaxy 177CRG3B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Galaxy |
| Model | 177CRG3B |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1027 MB |