Gaggia Magenta Plus handleiding
Handleiding
Je bekijkt pagina 36 van 76
36
English
Problem Cause Solution
The “INTENZA+” lter
cannot be inserted.
Remove the air from the lter. Let the air bubbles out of the lter.
The tank still contains some water. Empty the water tank before installing the lter.
The rubber seal is not inserted onto
the “INTENZA+” lter.
Check the packaging and insert the seal onto
the “INTENZA+” lter.
You can not activate the
“INTENZA+” lter.
Another lter is already active The machine indicates the lter usage in
percentage.
However, if you want to activate a new lter
before the one currently in use has expired, the
latter must be disabled rst as described in the
section “Replacing INTENZA+ water lter”
There is some water
under the machine.
The drip tray is too full and has
spilled over.
Empty the drip tray when the mark appears
though the tray. Always empty the drip tray
before starting the descaling procedure.
The machine is in
DEMO mode.
While switching on the machine,
you pressed a combination of
buttons (HOME
HOME
- CLEAN/SET
clean/setting
– HOME
HOME
- CLEAN/SET
clean/setting
).
Switch the machine off and on again, with the
ON/OFF
ON/OFF
button on the control panel.
GAGGIA accessories
Coffee and accessories are available through authorised centres (Italy),
or distributors in your country.
Descaling product INTENZA+ water lter Coffee oil remover
Coffee range available in beans and powder: 100% Arabica / Intense / Decaffeinated
4219-465-02821 MAN. GAG. MAGENTA Plus 120V EN-FR Rev 01.indd 36 21/01/2021 11:45:30
Bekijk gratis de handleiding van Gaggia Magenta Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gaggia |
| Model | Magenta Plus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8871 MB |
