Gaggia Classic GT handleiding
Handleiding
Je bekijkt pagina 13 van 76
13
English
Adjusting the grid height
To reduce the cup clearance and use smaller espresso cups.
1 Place the telescopic drain tube at its shortest position.
2 Lift the drip tray and position it via the dedicated guides as shown in the
drawing
Brew pressure adjustment
It is possible to adjust the brew pressure by rotating the external adjustment screw
(17) which is factory-set at 9 bars.
To adjust the brew pressure:
1 Disable the PRESET function if active.
2 Insert in the brew unit the lter holder with the blind lter.
3 Press the espresso toggle switch and read the bars on the manometer (34).
4 With a screwdriver rotate anticlockwise (-) to reduce the pressure or clockwise
(+) to increase it.
5 Stop the brewing by pressing the espresso toggle switch again when you
reach the desired bars on the brew gauge. .
6 Remove the lter holder and replace the blind lter with the 1 or 2 cups lter.
7 The machine is now ready for brewing.
Note: do not adjust the brew pressure by using the 1 cup or 2 cups lters. Use only
the blind lter.
Note: to avoid the risk of burns, do not remove the lter holder before point 5.
Note: the machine is equipped with a protection system so that if you activate the
coffee dispensing with the blind lter inserted for a time longer than 90 seconds,
the alarm E16 appears. This is normal, not a product defect.
6420-010-30223 CLASSIC GT 120V EN-FR-ES Rev.00.indd 136420-010-30223 CLASSIC GT 120V EN-FR-ES Rev.00.indd 13 30/07/2025 09:36:2530/07/2025 09:36:25
Bekijk gratis de handleiding van Gaggia Classic GT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gaggia |
| Model | Classic GT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7193 MB |
