Handleiding
Je bekijkt pagina 13 van 88
Basic Operation en-us
13
Note:If you skip the HomeConnect® assistant, further
manual settings appear on the display.
‒ Select the temperature unit "°C" or "°F".
‒ Select the time format "12" or "24".
‒ Set the time and confirm by pressing .
‒ Press to confirm the oxidation protection.
‒ Press to start the ethylene absorber installation and
follow the instructions on the display.
14.Touch to confirm the information on the display.
15.Press to finalize the initial start-up.
Basic Operation
8 Basic Operation
Basic Operation
8.1 Switching on the appliance
1. Switch on the appliance at the main switch.
→"Appliance", Fig.
1 /
12
,
Page10
a The appliance begins to cool.
2.
Set the desired temperature. →
Page13
8.2 Operating tips
¡ Once you have switched on the appliance, the set
temperature is only reached after several hours.
Do not put any food in the appliance until the set
temperature has been reached.
¡ The front and side panels of thehousing heat up
occasionally. This prevents condensation from forming.
¡ When you close the door, a vacuum may be created.
The door is then difficult to open again. Wait a moment
until the vacuum is offset.
¡ The temperature in the appliance varies due to the
following conditions:
– How often the appliance is opened
– Load capacity
– Temperature of newly stored food
– Ambient temperature
– Direct sunlight
8.3 Switching off the appliance
▶ Switch off the appliance at the main switch.
→"Appliance", Fig.
1 /
12
,
Page10
8.4 Setting the temperature
Setting the refrigerator compartment temperature
1. Touch the temperature display (refrigerator
compartment).
2. Swipe to the desired temperature setting.
The recommended temperature in the refrigerator
compartment is 37°F (3°C).
Setting the freezer compartment temperature
1. Touch the temperature display (freezer compartment).
2. Swipe to the desired temperature setting.
The recommended temperature in the freezer
compartment is 0°F (−18°C).
8.5 Cool-fresh compartment storage setting
You can set the temperature and humidity of the cool-
fresh compartment using predefined storage settings.
Tip:Further settings are available in the
HomeConnect®app.
Setting the cool-fresh compartment storage setting
1. Touch the cool-fresh compartment storage setting.
2. Swipe the required storage setting and confirm using .
8.6 Keylock
The button lock prevents the appliance from being
operated accidentally or incorrectly while running.
Note:You can permanently activate or deactivate the
automatic button lock.
Switching on the button lock
▶ Press and hold for 3seconds.
a lights up.
Switching off the button lock
▶ Press and hold for 3seconds.
Basic settings
9 Basic settings
Basic settings
9.1 Changing the basic settings
1. Swipe to "Settings".
2. Swipe to and touch the desired basic setting.
3. Change the basic setting.
Bekijk gratis de handleiding van Gaggenau RVB477790, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gaggenau |
| Model | RVB477790 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 10357 MB |
