Gaggenau DF481701F handleiding
Handleiding
Je bekijkt pagina 11 van 80
Environmental protection and energy-saving en-us
11
Environmental protection and energy-saving
4 Environmental protec-
tion and energy-saving
Environmental protection and energy-saving
4.1 Saving energy
If you follow these instructions, your
appliance will use less power and
water.
Use the Eco program.
a
The Eco program is energy-efficient
and environmentally friendly.
→
"Dishwasher Cycles", Page17
Change the sensor setting to the
default.
a
Consumption is reduced.
→
"Sensors", Page11
Zeolith drying automatically helps to
save energy.
a
→
"Zeolite drying ", Page11
4.2 Zeolite drying
The appliance features a Zeolite
container. Zeolite drying lets you save
energy.
Zeolite is a mineral that can store
moisture and energy and then release
them again.
During dishwashing energy is used to
heat up the washing water and dry the
mineral.
During the drying phase, moisture from
the interior of the dishwasher is stored
in the mineral and heat is released.
The heat is blown out into the interior
of the dishwasher with dry air. This
speeds up and improves drying.
Therefore, Zeolite drying is very
efficient.
Note:To avoid impairing Zeolite
drying performance, do not position
dishware parts directly in front of the
intake opening or the outlet opening of
the Zeolite container.
Do not position heat-sensitive
dishware parts directly in front of the
outlet opening of the Zeolite container.
→
"Appliance", Page13
4.3 AquaSensor
The AquaSensor is an optical
measuring device (light barrier) which
measures the turbidity of the washing
water. You can save water with the
AquaSensor.
The operation of the AquaSensor
depends on the selected cycle. If the
soiling level is high, the washing water
is drained off and replaced with fresh
water. If the soiling level is lower, the
washing water is used in the next
rinse, so reducing water consumption
by 3-6 liters. In the Auto cycles the
temperature and run time are
additionally adjusted to the level of
soiling.
4.4 Sensors
The sensors adjust the cycle sequence
and strength in the Auto cycles
depending on the level and type of
soiling.
The sensor has different sensitivity
levels that can be changed in the basic
settings.
→
"Changing the basic settings",
Page46
Bekijk gratis de handleiding van Gaggenau DF481701F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gaggenau |
| Model | DF481701F |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7051 MB |
