Handleiding
Je bekijkt pagina 16 van 44
16
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time of
40 minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50 and
switches off at 15:30.
Bear in mind that food which spoils easily should not be
left in the cooking compartment for too long.
Delaying the cooking time end
You have set the heating mode, temperature and
cooking time.
1 Touch the M symbol.
2 Use C to select the 5 "Cooking time end"
function.
3 Set the desired cooking time end using the rotary
selector.
4 Press I to start.
The appliance switches to standby. The heating mode,
temperature, cooking time and cooking time end appear
in the display. The appliance starts at the calculated
time and switches off automatically when the cooking
time has elapsed.
Note: If the 6 symbol flashes: You have not set the
cooking time. Always set the cooking time first.
Once the cooking time has elapsed, the appliance
switches off. The 5 symbol flashes and an audible
signal sounds. The signal stops early if you touch the ™
symbol, open the appliance door, or set the function
selector to 0.
To change the cooking time end:
Call up the timer menu. Use
C to select the 5
"Cooking time end" function. Set the desired cooking
time end using the rotary selector. Press
I to start.
To terminate the whole procedure:
Set the function selector to 0.
&RRNLQJWLPHHQG
Bekijk gratis de handleiding van Gaggenau BOP 210 111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gaggenau |
| Model | BOP 210 111 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 4132 MB |
