G3 Ferrari Energiko G10208 handleiding
Handleiding
Je bekijkt pagina 14 van 40
13
- After cooking, push the ON / OFF button, to turn off the appliance. Display shows “L”
-
Control panel (4)
1A) Timer after power regulation
- Press Timer (6) button during cooking. The display shows “0:00”.
- With the keys “+” and “-” set the duration of cooking, up to 3 hours.
- Display will show for some seconds the time set. During cooking on the display will appear the power
selected, and the time set. Cooking will stop automatically when time finishes.
KEY LOCK To lock the keypad on the control panel (4) press the key “Lock” (10) during use. On
display appears “Lo” to indicate the lock. To unlock press together the key “Lock” for 3 seconds.
SAFETY DEVICE
The unit turns off automatically if there is any pan placed on it, or it is removed, or it is made of such a
material not suitable for induction cooking. In this case, the unit will show and goes into stand-by. Every time
you turn off the appliance by pressing the ON / OFF button, the fan will continue to run until cooling down of
any part of the unit. To turn off the product, always push the ON / OFF button, do not turn it off by removing
the cooking container or by unplugging the unit.
ERROR MESSAGE
Error
Cause
Solution
E0/E1
High or low Voltage
Plug on a suitable electrical power outlet.
E2
Crystal plate is overheating.
Let the plate cool down for and remove what is overheating the
glass. Restart operation only when the plate is cool.
E3
Internal overheating
Let the plate cool down and check the ventilation fan is not
obstructed, refer to an Authorized Service since the thermostat
could be defective.
E5/E6
Temperature sensor failure.
Refer to Authorized Service since thermostat could be defective
E7
Not suitable vessel.
Vessel is not placed inside
the cooking area.
No vessel.
Use only pans suitable with induction cooking.
Place the vessel on the cooking area.
CLEANING - Unplug the unit from the electrical power outlet and wait for the complete cooling
down of every parts before starting cleaning.
Do not immerse in water and never leave the appliance under the jet of tap water. In any case, prevent water
or other liquids to flow on the surfaces. Do not use abrasive or metal sponges for cleaning.
Clean the cooking plate with a damp sponge.
TECHNICAL FEATURES
• Power supply: AC 220-240V ~50-60Hz. 2000W power
• Power regulation - 180 minutes timer - Key lock - Soft-touch buttons - Control lights
Bekijk gratis de handleiding van G3 Ferrari Energiko G10208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | G3 Ferrari |
| Model | Energiko G10208 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4341 MB |
