Fusion Apollo MS-RA800 handleiding
Handleiding
Je bekijkt pagina 26 van 50
Initializing Connected LED Lights Using the ActiveCaptain App
Before you can interact with any connected LED lights using the stereo, you must first initialize the lights by
providing information about the type of light source supported by the connected LEDs.
1 If necessary, open the ActiveCaptain app and connect it to the stereo or wireless router.
2 In the ActiveCaptain app, select Settings > Lighting.
A list of connected LED control modules is shown.
3 Select an LED control module with connected LED lights that you want to initialize and select Lights.
A list of all available lights is shown. Any light indicated with a yellow circle must be initialized before it's
available for use by the system.
4 Select a connected LED light from the list.
5 Select Light Types and select the type of LEDs connected:
• RGB: The connected dimmable LEDs support a full range of colors.
• RGBW: The connected dimmable LEDs support a full range of colors and high quality white light.
• CRGBW: The connected dimmable LEDs support a full range of colors and multiple temperature white
light.
• Single Channel: The dimmable LEDs support one dedicated color.
TIP: You can select Identify to illuminate the selected light to help identify and test the selected LED type.
6 Repeat this procedure for all connected lights until all of the intended LED lights are initialized.
General Settings
NOTE: When the stereo is in a group, you cannot change the settings on that stereo.
Select > SETTINGS.
NOTE: When a check box is filled, the option is on. When the check box is clear, the option is off.
DEVICE NAME: Sets a name for this device.
LANGUAGE: Sets the language used on the device.
TUNER REGION: Sets the region used by the FM and AM sources.
This setting is also needed to configure the DAB source.
TELEMUTE: Sets the behavior of the stereo when it detects a signal on the TELEMUTE wire in the wiring
harness. This is commonly used to change to the Aux1 source when you hold the button on a Fusion
handheld microphone. You can also choose to either mute the audio or change to the Aux1 source when
connected to a hands-free mobile phone kit. See your Fusion handheld microphone or hands-free mobile
phone kit instructions for more information.
NOTE: This setting does not affect a phone connected to the stereo using Bluetooth technology.
POWER OPTIONS: Adjusts the power settings, such as the GROUP SYNC (Power Options, page24).
SEARCHING: Enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks by
letter or number. You can select a number to enable the FAST menu if your music device contains more than
the selected number of items.
ZONE: Enables you to configure the speaker zones (Speaker Zone Settings, page21).
SOURCE: Allows you to enable, disable, and name the sources and groups on the stereo (Source Settings,
page24).
NETWORK: Enables you to configure the Fusion PartyBus network settings (Network Settings, page25).
UPDATE: Updates the stereo or connected devices using the appropriate update file on a connected USB flash
drive (Update Options, page30).
NOTE: It is not necessary to use this menu if you are updating the software using the Fusion Audio app on a
mobile device instead of using an update file loaded onto a USB flash drive (Updating the Software Using the
Fusion Audio App, page36).
UPDATE > FACTORY RESET: Restores all settings to the factory default values.
ABOUT: Shows the software version information for the stereo and connected accessories.
20 General Settings
Bekijk gratis de handleiding van Fusion Apollo MS-RA800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fusion |
| Model | Apollo MS-RA800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4682 MB |