Fusion Apollo MS-RA800 handleiding
Handleiding
Je bekijkt pagina 24 van 50
LED Lighting Control
WARNING
Setting some LED light effects or setting the LED lights to react to music may result in lights flashing at various
intervals. Consult your physician if you have epilepsy or are sensitive to bright or flashing lights.
NOTICE
Before you can control any connected lights using the stereo, you must first initialize the lights using a
compatible chartplotter on the same NMEA 2000 network as the lighting controller and the stereo. See the
installation instructions for the Garmin Spectra
™
lighting controller or the owner's manual for the chartplotter
for initialization instructions. If you do not have a compatible chartplotter connected, you can also initialize the
lights using the ActiveCaptain
®
app on a mobile device.
Using certain LED colors on your vessel, such as red and green, may violate the laws, regulations, and standards
related to the use and/or operation of marine navigation lights. It is the user's responsibility to comply with any
such applicable laws, regulations, and standards. Garmin is not responsible for any fines, penalties, citations, or
damages that may be incurred due to any such lack of compliance.
If you installed a Garmin Spectra lighting controller, you can use the stereo to activate and change limited
features on connected LED lights. You can quickly turn LED lights on and off, select preprogrammed lighting
effects, activate saved scenes, and use AUDIO SYNC to configure lights to change color and brightness to
music played on the stereo. If needed, more advanced control and configuration of the lights can be performed
using the ActiveCaptain app or using a compatible chartplotter on the same NMEA 2000 network and marine
network as the lighting controller and the stereo. See the owner's manual for the chartplotter for complete
instructions.
Turning LED Lights On and Off
1 Select > LED CONTROL.
2 Select LIGHTS and select the lights or group of lights you want to turn on or off.
3 Select ON to turn on the lights.
4 Select ON again to turn off the lights.
Turning on LED Light Effects
WARNING
Selecting some LED light effects may result in lights flashing at various intervals. Consult your physician if you
have epilepsy or are sensitive to bright or flashing lights.
The Garmin Spectra lighting controller has a selection of preprogrammed lighting effects that you can turn on
using the stereo.
1 Select > LED CONTROL.
2 Select LIGHTS and select the lights or group of lights you want to use a lighting effect.
3 Select EFFECTS and select one of the preprogrammed lighting effects to start it on the connected lights.
Starting an LED Light Scene
NOTICE
Before you can start an LED light scene using the stereo, you must use a connected chartplotter to create at
least one scene. See the owner's manual for the chartplotter for complete instructions.
1 Select > LED CONTROL > SCENES.
A list of previously-created scenes is shown.
2 Select a scene to start.
18 LED Lighting Control
Bekijk gratis de handleiding van Fusion Apollo MS-RA800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fusion |
| Model | Apollo MS-RA800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4682 MB |