Fusion Apollo MS-RA800 handleiding
Handleiding
Je bekijkt pagina 15 van 50
Bluetooth Source Menu and Settings
With the BLUETOOTH source selected, select > BLUETOOTH.
NOTE: The options in this menu vary based on the connected device.
CONNECTIONS > DISCOVERABLE: Allows the stereo to be visible to Bluetooth devices. You can turn off this
setting to prevent possible interruption to audio after pairing a Bluetooth device to the stereo.
CONNECTIONS > PAIRED DEVICES: Shows a list of Bluetooth devices paired with the stereo. You can select a
device in the list to connect it to the stereo if it is in range.
CONNECTIONS > REMOVE DEVICE: Removes the Bluetooth device from the stereo. To listen to audio from this
Bluetooth device again, you must pair the device again.
NOTE: You should also remove the stereo from the list of paired devices on your Bluetooth device to avoid
connection issues when pairing the device again.
REPEAT: Sets the repeat mode for the current selection (Apple devices only). You can repeat the current
selection by selecting the REPEAT ONE option. You can repeat all items in the selection by selecting the
REPEAT ALL option.
SHUFFLE: Shuffles the tracks in the folder, album, or playlist (Apple devices only).
PLAYLIST: Displays the playlists on the device (Apple devices only).
ARTISTS: Displays the artists on the device (Apple devices only).
ALBUMS: Displays the albums on the device (Apple devices only).
GENRES: Displays the genres of music on the device (Apple devices only).
SONGS: Displays the songs on the device (Apple devices only).
APPLE MUSIC RADIO: Displays the Apple Music Radio stations on the device (Apple devices only).
Disabling Bluetooth Auto Connection
By default, the stereo automatically reconnects to the last connected Bluetooth device when you turn it on. You
can disable this setting.
Select > SETTINGS > SOURCE > BLUETOOTH > AUTO CONNECT.
When the AUTO CONNECT checkbox is clear, the stereo will not attempt to automatically reconnect to a
Bluetooth device. When this feature is disabled, you must select a Bluetooth device manually to connect it
(Selecting a Different Bluetooth Device, page8).
Correcting Bluetooth Audio and Video Synchronization Issues
If you connected a Bluetooth device to the stereo and are watching a video on the device, you may encounter
a delay in the audio that does not match the video. This is most likely due to a networking setting, and can
be corrected. By default, the Bluetooth source is configured to be available as a streaming source across the
network, which may introduce audio synchronization issues when viewing video on the source device (Grouped
Stereo Source Considerations, page16).
1 From any source, select > SETTINGS > SOURCE > BLUETOOTH.
2 Select GROUP ENABLED to clear the checkbox.
The BLUETOOTH source is no longer an option for network streaming, which should reduce or eliminate the
audio delay.
Bluetooth Device Playback 9
Bekijk gratis de handleiding van Fusion Apollo MS-RA800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fusion |
| Model | Apollo MS-RA800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4682 MB |