Fusion Apollo MS-RA800 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950/ 50

Afdrukken

Je bekijkt pagina 12 van 50

Adjusting the Gain for an Auxiliary Device

You can adjust the gain for a connected auxiliary device to achieve a volume level similar to that of other media

sources. You can adjust the gain in 1dB increments. You can also adjust the gain for ARC sources connected

using an HDMI

®

cable.

1 Select an applicable source.

2 Select an option:

• To increase the gain, select .

• To decrease the gain, select .

NOTE: To achieve the best audio quality when using a portable media player with headphone output, it may

be necessary to adjust the volume control on the media player, instead of adjusting the gain.

Speaker Zones

You can group speakers in one area into a speaker zone. This enables you to control the audio level of the

zones individually. For example, you could make the audio quieter in the cabin and louder on deck.

You can set the balance, volume limit, tone, subwoofer frequency, and name for each zone, and configure other

zone-specific settings (Speaker Zone Settings, page21).

NOTE: Subwoofer frequency is not adjustable when managed by DSP.

DSP Settings

This stereo features digital signal processing (DSP). You can select pre-configured DSP settings for Fusion

®

speakers and amplifiers to optimize audio reproduction in their installed locations.

All DSP settings are configured using the Fusion Audio remote control app (Fusion Audio Wireless Remote

Control App, page31).

Configuring the DSP Settings

You must download and install the Fusion Audio remote control app on your compatible Apple

®

or Android

™

device before you can configure the DSP settings (Fusion Audio Wireless Remote Control App, page31).

You can configure the DSP settings to optimize the sound on each zone with the installed speakers, amplifiers,

and environment.

1 From the settings menu on your Apple or Android device, connect to the stereo using Bluetooth technology

or connect to the same wireless network as the stereo.

NOTE: If you have a compatible Apple device, you can connect a USB sync cable appropriate for your device

(sold separately) to the USB port on the stereo and to your Apple device to configure the DSP settings using

the Fusion Audio app.

2 Open the Fusion Audio remote control app on your compatible Apple or Android device.

3 If necessary, select the stereo you want to configure.

4 Select .

5 If necessary, select the MUSIC tab.

6 Select a zone.

7 Select DSP SETTINGS.

8 Configure the DSP settings as needed, depending on the models of Fusion speakers and amplifiers

connected to the zone.

9 Select SEND DSP SETTINGS.

NOTE: DSP settings or updates for the zone are not applied on the stereo until you select the button to send

the settings.

10 Repeat these steps for each zone.

6 Audio Control

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950/ 50

Bekijk gratis de handleiding van Fusion Apollo MS-RA800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd