Furuno VR-7000 handleiding
Handleiding
Je bekijkt pagina 27 van 79
1. OPERATION
1-15
Note 1: If an error occurs during the formatting of the USB flash memory, the mes-
sage "Format Error! Extract Canceled" appears. Press any key to clear the mes-
sage then check the USB flash memory.
Note 2: If an error occurs during data extraction or the there is no recorded data,
the message "Extract Error! Extract Canceled" appears.
9. Lock the DCU door after the data is extracted.
1.3.6 How to record the data to a USB flash memory
Data which is recorded to the capsule can be recorded to a USB flash memory as the
user disk. Insert a USB flash memory to the USB port on the power control panel (see
subsection 1.2.1). The recording time is from 72 to 720 hours, at 72 hours intervals.
Have a qualified technician initialize USB flash memory before use. For details, con-
tact your dealer.
During recording to a USB flash memory, if alert numbers 412504 or 412514 occur
(see section 3.2), remove then reconnect the USB flash memory. If the error occurs
again during recording, contact your dealer for service.
Note: Do not use the RAP to record data when recording to a USB flash memory.
1.3.7 How to execute SAVE function for recorded data (only for VR-
7000S)
If marine incidents occur, record the data, which are recorded to the capsule, to area1
(or 2, 3, 4) in the long term device(s). When all areas are used, the memory for the
oldest area is automatically overwritten with the new memory in order from the oldest
area.
1. Press the MENU/ESC key to open the main menu.
2. Use the cursorpad ( or ) to select [Execute SAVE Function] then press the
ENT key. The window changes as follow.
Note 1: If the save processing fails, the message "Save Error" appears. When the
save processing can not be executed, the message "DCU setting to be checked
for SAVE function." appears. When this message appears, contact your dealer.
Note 2: The recording to the long term device(s) does not stop when all areas are
used.
Note 3: The SAVE execution does not affect the recording operation for the long
term device(s) or the connected DRU.
Execute a save.
Save Complete
AreaX
X
: 1 to 4
During save Completion of save
Press any key to clear
this window.
Bekijk gratis de handleiding van Furuno VR-7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | VR-7000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11636 MB |
