Furuno SFD-1012 handleiding
Handleiding
Je bekijkt pagina 16 van 265
○ Configuration with two display units (1)
○ Configuration with two display units (2)
The following connections enable the radar operations from both SFDs.
When connecting the fish finder and radar, both SFDs can operate
fish finder or radar.
Using the Auto IP function, IP address is assigned without causing
interference on network.
Settings are not shared between SFDs.
Only either one of the SFDs outputs navigation data to LAN.
Both SFDs can be used for display and control of radar or fish finder by
selecting a sensor to use in the [CONNECTING EQUIPMENT SETTING]
menu.
The [CONNECTING EQUIPMENT SETTING] menu appears if the SFD or
SFDs are activated prior to the setup of connecting equipment.
If the [CONNECTING EQUIPMENT SETTING] menu is executed, the
[CONNECTING EQUIPMENT SETTING] menu appears when an application
is restarted.
Using the Auto IP function, IP address is assigned without causing
interference on network.
Settings are not shared between SFDs.
Only either one of the SFDs outputs navigation data to LAN.
xiv
SYSTEM CONFIGURATION
HUB-101/102
HUB-101/102
Bekijk gratis de handleiding van Furuno SFD-1012, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | SFD-1012 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 69795 MB |
