Furuno RD-50 handleiding
Handleiding
Je bekijkt pagina 15 van 91
1. BASIC OPERATION
1-5
1.3 How to Adjust Display Brilliance
To adjust the display brilliance, press or key. The setting range is 0 to 9 (default
setting: 9). "0" is off and "9" is the brightest. Hold down or key to change the dis-
play brilliance rapidly.
Operation with RD-50 (main)
• When the DDC sentence is invalid, the RD-50 (main) simultaneously controls the
display brilliance of the RD-50 (main) and all of the connected RD-50s (sub).
• When the DDC sentence is valid, the RD-50 (main) controls only the display bril-
liance of the RD-50 (main). The RD-50 (main) does not control the display brilliance
for any of the connected RD-50s (sub).
Controls with /key: Decrease/increace the display brilliance.
Operation with RD-50 (sub)
• When the DDC sentence is invalid, the RD-50 (sub) adjusts the display brilliance of
the RD-50 (sub) itself as follows to equalize brilliance with RD-50 (main). The vari-
ation is smaller than that of RD-50 (main) and RD-502 connected to RD-50 (main).
• When the DDC sentence is valid, the RD-50 (sub) adjusts the display brilliance of
the RD-50 (sub) itself. The RD-50 (sub) does not control the display brilliance of the
other connected RD-50s (sub).
Controls with / key: Decrease/increace the display brilliance.
Note 1: When setting RD-50 (sub), the variation becomes small.
Note 2: When the display brilliance is 0, 1 or 9 on a main RD-50, this operation by RD-
50 (sub) is not available.
Operation with RD-502
The RD-502 simultaneously controls the display brilliance of the RD-50 (main) and the
connected RD-50s (sub).
Controls with / key: Decrease/increace the display brilliance.
FURUNO
DISP UNIT
MODE
REMOTE CONTROLLER
RD-501
FURUNO
DAY
NT
DIMMER CONTROLLER
RD-502
BRILL
RD-501
RD-502
RD-50: A (main)
12-24 VDC
NMEA 0183
sensor signal
RD-50: B (sub) RD-50: C (sub)
RD-50: D (main)
RD-50: E (sub)
12-24 VDC
12-24 VDC
12-24 VDC
12-24 VDC
FURUNO
DISP UNIT
MODE
REMOTE CONTROLLER
RD-501
RD-501
FURUNO
DISP UNIT
MODE
REMOTE CONTROLLER
RD-501
RD-501
FURUNO
DISP UNIT
MODE
REMOTE CONTROLLER
RD-501
RD-501
FURUNO
DISP UNIT
MODE
REMOTE CONTROLLER
RD-501
FURUNO
DAY
NT
DIMMER CONTROLLER
RD-502
BRILL
RD-501
RD-502
FURUNO
RD-50
PWR
DISP
DAY
NT
MENU
ESC
ENT
BRILL
FURUNO
RD-50
PWR
DISP
DAY
NT
MENU
ESC
ENT
BRILL
FURUNO
RD-50
PWR
DISP
DAY
NT
MENU
ESC
ENT
BRILL
FURUNO
RD-50
PWR
DISP
DAY
NT
MENU
ESC
ENT
BRILL
FURUNO
RD-50
PWR
DISP
DAY
NT
MENU
ESC
ENT
BRILL
The RD-502 connected to RD-50 A
commonly controls the brilliance of
RD-50 A, RD-50 B and RD-50 C.
The RD-502 connected to RD-50 D
commonly controls the brilliance of
RD-50 D and RD-50 E.
Bekijk gratis de handleiding van Furuno RD-50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | RD-50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13797 MB |
