Furuno NAVpilot-1000 handleiding
Handleiding
Je bekijkt pagina 14 van 89
1. OPERATION
1-2
1.2 How to Turn Power On, Off
1.2.1 How to turn the power on
Press and release the Power key ( ) to turn the power on.
The NAVpilot-1000 shows the startup screen for a short period of time, while the in-
ternal diagnostic check is performed. When the diagnostic is completed, the results
appear on the screen. If the test results are all successful (no items appear as "NG"),
the Autopilot main screen appears.
Note: When the heading sensor is PG-700/Satellite Compass
™
, do not set sail for four
minutes after turning on the heading sensor. This allows time for the heading sensor
to output heading data.
If "NG" appears for any item, an error message, shown in the table below, appears.
Follow the information provided in the message to restore normal operation. If you
cannot restore normal operation, contact a FURUNO dealer for information. The ta-
bled messages are listed in order of priority from highest to lowest.
If there is more than one error, the error with the next highest priority appears. To clear
the message(s) from the screen, press any key once for each message.
13 Speaker Activates key beeps and alert sounds.
Note: A thin waterproofing sheet is attached to the speaker on the
control unit. Do not insert brushes or other objects into the speaker
holes when cleaning them. If the sheet is torn, the speaker may be
damaged if water leaks through the holes.
Error message Meaning
Communication error with the processor unit.
Check connections.
Contact your local dealer if the problem recurs.
The processor unit may be turned off
or disconnected. Check that the
power is supplied to the processor
unit, then check the NMEA2000 net-
work connections between the pro-
cessor unit and control unit. If the
error is not rectified, contact your
dealer.
Processor has failed the startup test.
Contact your local dealer.
Processor unit requires inspection
by a qualified technician.
Controller has failed the startup test.
Contact your local dealer.
Control unit requires inspection by a
qualified technician.
Processor backup data is corrupt or lost.
Processor factory defaults will be restored.
Press any key to continue.
Previously saved backup data is ei-
ther lost or corrupted and cannot be
used. Factory default settings will be
used to start the equipment. User
settings must be re-entered.
Controller backup data is corrupt or lost.
Controller factory defaults will be restored.
Press any key to continue.
Control unit and processor unit software ver-
sions do not match.
Update software to latest version.
The software version of the control
unit and the processor unit are differ-
ent. Update to the latest version of
software for both units.
No. Name Description
Bekijk gratis de handleiding van Furuno NAVpilot-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | NAVpilot-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9190 MB |
