Furuno GP-3700F handleiding
Handleiding
Je bekijkt pagina 18 van 236
1. OPERATIONAL OVERVIEW
1-4
The start-up screen disappears then the last-used screen (e.g. plotter display) ap-
pears.
Your position is displayed approx. 90 seconds after the power on. Until your position
is found, the message "NO FIX" is displayed at the bottom of the plotter display. After
your position is found, the indication "2D" or "3D" appears depending on the position
fix status.
To turn off the power, press and hold the POWER/BRILL key. The message "HOLD-
ING THE POWER KEY WILL TURN THE GP-3700 OFF. POWER OFF IN 3 s." ap-
pears then the countdown until power-off is started. Press and hold the POWER/
BRILL key until the indication "0 s" appears. The message "GP-3700 SHUTTING
DOWN. PLEASE WAIT." appears then the power is turned off.
Note: Use the POWER/BRILL key to turn off the power. Also, turn off the main power
after the display goes blank. If the unit is turned off from the main power, the settings
and date from the 10 seconds before turning off the power may not be saved.
DGPS beacon receiver
The GP-3700F is available in two specifications, with DGPS beacon receiver and no
DGPS beacon receiver. Only the beacon receiver equipped GP-3700F has DGPS ca-
pability. To get DGPS capability, install the optional internal DGPS beacon receiver
(name: Beacon Receiver Set, type: OP14-80, code no.: 000-029-392).
1.3 How to Adjust the Brilliance of the Display and
Panel
The brilliance of the display and panel dimmer can be adjusted from the [BRILL] win-
dow.
1. Press the POWER/BRILL key to show the [BRILL] window.
Note: The [BRILL] window closes automatically when there is no operation for five
seconds.
2. To adjust the display brilliance, press or , or rotate the ENTER knob (setting
range: 1 to 8).
3. To adjust the panel brilliance, press or , or push the ENTER knob (setting
range: 1 to 8).
Indication Meaning Indication Meaning
GP-2D 2D GPS position fix GP-S2D 2D GPS+SBAS position fix
GP-3D 3D GPS position fix GP-S3D 3D GPS+SBAS position fix
GP-D2D 2D DGPS position fix GP-Q2D 2D QZSS position fix
GP-D3D 3D DGPS position fix GP-Q3D 3D QZSS position fix
NO FIX No position fix
Bekijk gratis de handleiding van Furuno GP-3700F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | GP-3700F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24970 MB |
