Furuno GP-3700F handleiding
Handleiding
Je bekijkt pagina 16 van 236
1. OPERATIONAL OVERVIEW
1-2
No. Key, control Description
1
POWER/BRILL
• Short press at power-off: Turns the power on.
• Short press at power-on: Opens the [BRILL] window.
• Long press while powered: Turns the power off.
2 MOB Marks a man overboard position at own ship position or cursor po-
sition.
3 WPT Opens the [WAYPOINTS LIST] window.
4 GOTO Sets, releases destination.
5 DISP • Cycles through displays (basic screen: plotter, echo sounder).
• Returns to the basic screen with menu or window open.
6 TM/RM Alternately selects true motion (TM) and relative motion (RM) dis-
plays.
TM: The own ship mark moves along with own ship position.
RM: The chart moves along with own ship position. The relative po-
sition for own ship mark on the screen is fixed.
7 MODE Changes the orientation mode.
8 ZOOM IN, ZOOM OUT Zooms the chart display range in or out.
9 ENTER knob • Rotate: Changes numeric data, selects menu items.
• Push: Confirms alphanumeric data entry or an operation.
• Push (default setting): Shows the past picture on the echo
sounder display with the single frequency.
10 CANCEL • Silences the audio alarm.
• Erases marks and waypoints.
• Clears alphanumeric data.
11 MENU • Opens/closes the main menu.
• With the menu open, goes back one layer in selected menu.
• Closes the window.
12 Numeric keys 0 to 9 • Enters numeric data.
• 1 to 8: Enters corresponding mark labeled on the key.
• Selects menu items.
• 0: Measures range and bearing between two points.
• 9: Enters the same mark as the last entered one then connects
them. This function is not available when no mark is entered
since power-on.
13 MARK/NUM Selects mark input format, mark symbol or numeric.
14 PLOT INTVL Starts, stops plotting of own ship track.
15 MARK COLOR Opens the [CHANGE MARK COLOR] window.
16 TRACK COLOR Opens the [CHANGE TRACK COLOR] window.
17 , , ,
(CursorPad)
• Moves the cursor.
• Selects menu items.
18 CENTER • Cursor shown: Moves cursor to the screen center.
• Cursor not shown: Moves own ship position to the screen center
or the position one-third from the bottom of the screen depending
on the orientation mode.
• Confirms alphanumeric data entry or an operation on the menu.
19 CURSOR ON/OFF • Turns on/off the cursor.
• Switches + to - and vice versa.
• Switches N to S, E to W and vice versa.
• Long press: Switches control between split screen displays other
than compass display.
20 CURSOR SEL Selects cursor configuration among circle, parallel or diamond.
21 Trackball Moves the cursor.
22 UNDO Undoes previous mark/line input, edit or deletion operation.
23 F1, F2 Activates assigned program.
Bekijk gratis de handleiding van Furuno GP-3700F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | GP-3700F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24970 MB |
