Furuno FM-8900S handleiding
Handleiding
Je bekijkt pagina 53 van 151
3. DSC DISTRESS OPERATIONS
3-17
The example figure below shows the message window on the FM-8900S when the
MOB procedure is activated.
1. Press the [CANCEL] key to stop the alert and the flashing LED.
Note: In a situation where more than one MOB distress message has been re-
ceived, the alert terminates automatically and the pop-up message disappears
automatically.
2. The pop-up message disappears.
3. If your ship is able to assist with rescue, set the procedure as [ACTIVE], and then
select [ACK].
4. The popup message disappears and the ACK message is sent.
5. If you require assistance, set the procedure as [RELAY].
DISTRESS ALERT
The example figure below shows the message window on the FM-8900S when the
DISTRESS ALERT message is received from a MOB device.
Referring to section 3.2, acknowledge the message.
Bekijk gratis de handleiding van Furuno FM-8900S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | FM-8900S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18955 MB |
