Furuno FM-8900S handleiding
Handleiding
Je bekijkt pagina 23 van 151
1. OPERATIONAL OVERVIEW
1-9
1.11 How to Set the Auto Acknowledgment
Individual, PSTN (public switched telephone network), position, polling and test calls
can be acknowledged automatically or manually. This is set on the [ACK SETTINGS]
in the [DSC] menu (see section 5.16).
Note: When own ship's communication is high priority, set to manual acknowledg-
ment. The auto acknowledgment is not sent in the following cases:
Note: The auto acknowledgment for the individual call is sent only when the proposed
channel or communication mode is not available.
1.12 Priority of the System
If one or more remote stations are installed, the transceiver unit has the highest prior-
ity. You can interrupt remote handset operation at any time with the handset of the
main unit. When you hook off the handset of the main unit, "OCCUPIED BY: FM-
8900S" (Default. This can be changed.) is indicated on all remote handsets. Each re-
mote handset has its own priority. The remote handset ID (1-4) indicates its priority.
The priority of the system is as follows:
Transceiver unit = Analog wing handset > Digital wing handset L = Digital wing hand-
set R > Remote handset 1 > Remote handset 2 > Remote handset 3 > Remote hand-
set 4.
If you hook off No.4 remote handset, for example, "IN USE BY: HANDSET_P4" is dis-
played on other remote handsets and "HANDSET_P4: OPERATION" on the trans-
ceiver unit. However, you can hook off and use No.1 remote handset.
The terminal which you operate has priority in the following conditions:
How to set the terminal ID
1. Disconnect the remote handset from the terminal to turn off the remote handset.
2. While pressing the MENU key of a remote handset, connect the plug to turn on
the power.
3. Enter the terminal ID, using the 1 to 6 keys, then press the ENTER key. Do not
assign the same number to multiple remote handsets. If the handset is used as a
wing handset, assign terminal ID 5 to the left-side handset and terminal ID 6 to the
right-side handset.
• Other session is active.
• There are RT or DSC sessions (for individual call).
• Channel is in use.
• ECC is NG (No Good).
• The handset goes off hook.
• Display the menus or setting windows.
• Display each function screen (for example, Log).
• Switch the session.
• Press a key or rotate the CHANNEL/ENTER knob. (The priority is lost after four sec-
onds.)
Bekijk gratis de handleiding van Furuno FM-8900S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | FM-8900S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18955 MB |
