Furuno FM-8900S handleiding
Handleiding
Je bekijkt pagina 146 van 151
APPX. 8 ALERT LIST AND CODES
AP-34
*: The displayed message for received DSC messages changes according to the message con-
tents, however the alert ID, priority, category and measures taken do not change.
Note: Priority and category for alerts is dependent on the alert management system in use. The
tables above show the priority and category for BAMS.
– – Communication error with
Remote HS!
Communication be-
tween the transceiver
unit and a remote hand-
set is interrupted or lost.
Check connection to
handset. If the problem
persists, contact your
dealer.
630 3016 EPFS error! No position data input for
ten minutes.
Note: This message
does not appear when
[INPUT TYPE] in the
[POSITION] menu is set
to [MANUAL].
Input position data.
– – Cannot print. Check printer. Printer problem. Cannot
print.
Check printer connec-
tion, power, paper.
– – Communication Error with
BAM!
Position data is not cur-
rent.
Update current ship po-
sition manually.
– – Unable to transmit!Hard-
ware error occurs.Check
alarm status.
Unable to transmit. TX
circuit’s PLL may be un-
locked.
Contact your dealer.
– – System was rebooted. An internal error has oc-
curred. The system has
rebooted.
The system will automat-
ically restart. If the prob-
lem persists, contact
your dealer.
– – The unit will not transmit any
DSC call until own ship's
MMSI is entered.
You tried to send a DSC
message but your MMSI
has not been registered
in the equipment.
Enter the MMSI no. of
your ship.
Alert
ID
BAM
ID
Displayed Message Meaning (OM) Measure (OM)
Bekijk gratis de handleiding van Furuno FM-8900S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | FM-8900S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18955 MB |
