Furuno FM-4850 handleiding
Handleiding
Je bekijkt pagina 98 van 135
INSTALLATION
FM-4850 Operator’s Manual
88
Wiring
Step 1 Remove the antenna connector cover on the rear back of the unit.
Step 2 Insert the antenna cable into the antenna connector.
Step 3 Tighten the antenna hand tight.
Step 4 Secure the cable with the electrical cable.
Waterproofing the Connection
To waterproof the connection, refer to the procedures outlined below. By
waterproofing the connection, the IPx7 rating can be maintained.
Step 1 Take the Self-bonding tape in the length of about 100 mm.
Step 2 Connect the VHF antenna to the radio and tighten it clockwise.
Step 3 Slightly stretch one end of the Self-bonding tape and wind it clockwise on
the antenna head.
Step 4 Wrap around the cable.
Bekijk gratis de handleiding van Furuno FM-4850, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | FM-4850 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19696 MB |
