Furuno DFF-3D handleiding
Handleiding
Je bekijkt pagina 13 van 84
1. INSTALLATION
1-3
1.3 Transducer
Thru-hull mount
The installation position of the transducer directly affects the performance of the trans-
ducer. For best performance, keep the following points in mind when selecting the
mounting location.
• Select a location where the influence of water flow and air bubbles is minimal.
• Select a place least influenced by engine noise.
• Do not install the transducer inboard.
• For FRP vessel, do not cover the transducer with fiberglass, to prevent damage to
the transducer if the temperature rises.
• Bottom slope angle less than 24°
The illustration below is the transducer with fairing, and was created by the Airmar
®
Technology Corporation. The BOW mark (arrow) on the fairing and the triangular re-
cess should be facing the bow.
Unit of measurement
Top: millimeter
Bottom: inch
BOW
BOW
BOW
BOW mark
Triangular recess
Bekijk gratis de handleiding van Furuno DFF-3D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | DFF-3D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12173 MB |
