Furuno CI-88 handleiding
Handleiding
Je bekijkt pagina 5 van 75
SAFETY INSTRUCTIONS
iii
The high quality TFT LCD displays 99.99%
of its pixels. The remaining 0.01% of pixels
may light or dropout, however this is not
an indication of malfuction; it is a
characteristic of the LCD.
Check the zinc plate (anticorrosion
measure) regularly for corrosion and
replace it when the ship is drydocked.
Corrosion may occur. As a result the
transducer may fall out, allowing water to
leak inside the vessel.
Do not use the equipment for other than
its intended purpose.
Damage to the equipment or bodily injury
may result if the equipment is misused.
Do not transmit with the transducer out
of water, when drydocked, etc.
The transducer may become damaged.
Turn off the power at the switchboard
immediately whenever you feel the
equipment is abnormal.
Turn off the equipment at the switchboard
if it becomes warm or is making strange
noises. Contact your dealer at your
earliest convenience.
WARNING LABEL
A warning label is attached to the
transceiver and monitor units. Do not
remove the labels. If a label is missing or
damaged, contact a FURUNO agent or
dealer about replacement.
Transceiver Unit
Name: Warning Label (1)
Type: 86-003-1011-1
Code No.: 100-236-231
Monitor Unit
Name: Warning Label (2)
Type: 03-129-1001-1
Code No.: 100-236-741
TFT LCD
CAUTION
Bekijk gratis de handleiding van Furuno CI-88, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | CI-88 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7018 MB |
