Furuno CI-68 handleiding
Handleiding
Je bekijkt pagina 21 van 67
1. OPERATIONAL OVERVIEW
1-9
In case of [ON] of [NAV MODE]
The tracking mode changes cyclically in the sequence of ground tracking, nav and
auto (or external).
1.7 How to choose the Range
You may choose the speed range by pressing the RANGE key. Also, you can change
the range setting on the menu.
1. Press the RANGE key to show the range setting
window. The window shown right appears (ex.
range setting window for tide vector display).
Note: This window disappears when there is no
operation for five seconds.
2. Operate the Setting Knob or the CursorPad to set the range.
Display and range to set
Note: The RANGE key is not available on the Text display.
Setting Knob: Rotate clockwise to raise the range; counterclockwise to lower the
range.
CursorPad: Press or to raise the range; or to lower the range.
Display Range Menu operation
Tide vector Tide speed range setting window appears. Set tide/tide differen-
tial range (radius of vector display ring) appropriately.
Setting range: 0.5 kn, 1.0 kn, 1.5 kn, 2.0 kn, 3.0 kn, 5.0 kn, 10.0 kn
[TIDE RANGE]
(subsection 3.4.1)
Ship’s
speed
The ship’s speed range setting window shown depends on
whether [SCALE SYNC] in the [DISP 2] sub menu is set to [ON]
or [OFF].
[ON]: Port-starboard and fore-aft speeds are synchronized. The
ship’s speed range setting window appears. Set speed appropri-
ately.
[OFF]: The ship’s speed range setting window appears. Set fore-
aft speed appropriately.
Setting range: 0.5 kn, 1.0 kn, 2.0 kn, 3.0 kn, 5.0 kn, 10.0 kn, 20.0
kn, 30.0 kn
[SCALE SYNC]
[DRIFT SCALE]
[SCALE]
(subsection 3.4.3)
Graph The speed range setting window shown depends on the setting
of [MODE] in the [DISP 2] sub menu. See subsection 3.4.4.
[TIDE], [TIDE DIF]: The tide speed range setting window ap-
pears. Set tide speed range (port-starboard of tide speed/tide dif-
ferential graph) appropriately.
Setting range: 0.5 kn, 1.0 kn, 1.5 kn, 2.0 kn, 3.0 kn, 5.0 kn, 10.0 kn
[SHIP SPD]: The ship’s speed range setting window appears. Set
ship’s speed range (fore-aft of ship’s speed graph) appropriately.
Setting range: 0.5 kn, 1.0 kn, 2.0 kn, 3.0 kn, 5.0 kn, 10.0 kn, 20.0
kn, 30.0 kn
[TIDE RANGE]
(subsection 3.4.1)
Course
plot
The display scale setting window appears. Set display scale as
appropriate.
Setting range: 1:10,000, 1:20,000, 1:50,000, 1:100,000
[SCALE]
(subsection 3.4.3)
Echo level Tide speed range setting window appears. Set tide and tide dif-
ferential range (radius of vector display ring) appropriately.
Setting range: 0.5 kn, 1.0 kn, 1.5 kn, 2.0 kn, 3.0 kn, 5.0 kn, 10.0 kn
[TIDE RANGE]
(subsection 3.4.1)
Bekijk gratis de handleiding van Furuno CI-68, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | CI-68 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6831 MB |
