Furuno CI-68 handleiding
Handleiding
Je bekijkt pagina 14 van 67
1. OPERATIONAL OVERVIEW
1-2
1.2 How to Turn the Power On/Off
Power ON
Press the POWER switch at the left hand side of the control unit to turn the power on.
A beep sounds, the equipment turns on, and the lamp above the switch lights. The
equipment conducts the diagnostic test to check for proper operation between the
transceiver unit and the control unit and displays the results. After the diagnostic test
is completed the last-used display appears.
Diagnostic test
Note: The example screens shown in this manual may not match the screens you see
on your display. The screen you see depends on your system configuration and equip-
ment settings.
Power Off
To turn the power off, press the POWER switch again.
Note: The NAV mode measures tides in deep waters where ground tracking is not
available. To use this function effectively, accurate heading data (from a gyrocom-
pass, satellite compass) is necessary. For further details, see section 1.8.
䚷䚷
XX: Program Version No.
CI-68
CI-6888
Starter. 6653000-xx.xx
Booter1. 6653001-xx.xx
Booter2. 6653001-xx.xx
VOL. 6653002-xx.xx
FPGA. 6653004-xx.xx
MEM. 1 2 3 4 OK
CI-6810
VOL. 6651202-xx.xx
TBL.
MEM. 1 2 3 4 5 6 7 8 OK
ANA. 12V;12.03V BV;110.0V
TRM. +25.02 deg.
DSW. 00 00 00 01
DSW. -- 00 00 01
Bekijk gratis de handleiding van Furuno CI-68, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | CI-68 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6831 MB |
