Fun Generation Satmix 2.1 handleiding
Handleiding
Je bekijkt pagina 9 van 28
NOTICE!
Damage to the device due to high voltages!
The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol‐
tages can also cause a risk of injury and res. The voltage selector switch can be used to set the device to the required operating
voltage. Make sure that the voltage set on the device matches the local power supply network before plugging in the device. Only
operate the device from professionally installed mains sockets that are protected by a residual current circuit breaker (FI). Ensure that
the power cord plug is easily accessible at all times if it is the only device to safely disconnect the device from the mains supply. As a
precaution, disconnect the device from the power grid when storms are approaching or it the device will not be used for a longer
period.
NOTICE!
Risk of re due to installation of a wrong fuse!
Using fuses of a dierent type than compatible with the device may cause a re and seriously damage the device. Only use fuses of
the same type. Observe the labelling on the device casing and the information in the "Technical data” chapter.
NOTICE!
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product may react with the coating of the oor and cause permanent dark stains
after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the product’s rubber feet and the
oor.
Safety instructions
Satmix 2.1
9
Active Speaker
Bekijk gratis de handleiding van Fun Generation Satmix 2.1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fun Generation |
| Model | Satmix 2.1 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1892 MB |