Fun Generation PartyPar 12 DMX handleiding

Niet gecategoriseerd

Fun Generation

48 pagina's

PDF beschikbaar

Handleiding

If you have selected programme ‘A5.XX’ , you can choose one of 19 shows and adjust the ash

frequency of the strobe eect.

1. Press [ENTER] after selecting the programme.

2. Press [UP] or [DOWN], to select a show between ‘A5.01’ and ‘A5.19’ .

3. Press [ENTER] to conrm the selection.

4. Press [UP] or [DOWN] to select a ash frequency for the strobe eect between ‘01’ (slow)

and ‘32’ (fast).

5. Press [ENTER] to conrm the selection.

7.4 Sound control

Sound control can only be activated if the device is operating in stand-alone mode or as the

master in a master/slave conguration and if the device is not controlled via a DMX controller.

In this operating mode, the device responds to acoustic pulses which are recorded by the inte‐

grated microphone.

1. Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘A4.XX’ .

2. Press [ENTER] to conrm the selection.

3. Press [UP] or [DOWN], to select a show between ‘A4.01’ and ‘A4.19’ .

Settings for programme ‘A5.XX’

Operating

PartyPar 12 DMX

LED PAR

Bekijk gratis de handleiding van Fun Generation PartyPar 12 DMX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.