Fun Generation LED BARbara 24 handleiding
Handleiding
Je bekijkt pagina 27 van 48
This setting can only be activated if the device is operating in stand-alone mode or as the
master in a master/slave conguration and if the device is not controlled via a DMX controller.
1. Press [MODE] until the display shows ‘SLAv’ .
2. If you don't press any button for about 30 seconds, the current setting will be automati‐
cally applied and the display turns o.
3. To return to the parent menu without making any changes, press [MODE].
Sound control can only be activated if the device is operating in stand-alone mode or as the
master in a master/slave conguration and if the device is not controlled via a DMX controller.
In this operating mode, the device responds to acoustic pulses which are recorded by the inte‐
grated microphone.
1. Press [MODE] until the display shows ‘SUxx’ .
ð
A sound-controlled automatic show is activated.
2. To adjust the sensitivity of the built-in microphone for sound control, use [UP] or [DOWN]
to select a value between ‘SU00’ (low sensitivity) and ‘SU31’ (high sensitivity).
3. If you don't press any button for about 30 seconds, the current setting will be automati‐
cally applied and the display turns o.
4. To return to the parent menu without making any changes, press [MODE].
“Slave” mode
Sound control and microphone
sensitivity
Operation
LED BARbara 16, LED BARbara 24
27
LED Bar
Bekijk gratis de handleiding van Fun Generation LED BARbara 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fun Generation |
| Model | LED BARbara 24 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2682 MB |
