Fun Generation LED BARbara 24 handleiding
Handleiding
Je bekijkt pagina 11 van 48
NOTICE!
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient
conditions specied in the “Technical specications” chapter of this user manual. Avoid operating it in environments with direct sun‐
light, heavy dirt and strong vibrations. Avoid operating it in environments with strong temperature uctuations. If temperature uc‐
tuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the device immediately.
Never subject the device to liquids or moisture. Never move the device to another location while it is in operation. In environments
with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualied specialists at reg‐
ular intervals to prevent damage due to overheating and other malfunctions.
NOTICE!
Damage to the device due to high voltages!
The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol‐
tages can also cause a risk of injury and res. Make sure that the voltage specication on the device matches the local power grid
before plugging in the device. Only operate the device from professionally installed mains sockets that are protected by a residual
current circuit breaker (FI). Ensure that the power cord plug is easily accessible at all times if it is the only device to safely disconnect
the device from the mains supply. As a precaution, disconnect the device from the power grid when storms are approaching or it the
device will not be used for a longer period.
NOTICE!
Risk of re by exceeding the maximum current!
The device can supply power to other devices of identical design and connected in series. If too many devices are connected, the
maximum permitted power consumption can be exceeded, which can cause the device to overheat and burst into ames. Only con‐
nect devices of identical design to the device. When deciding how many devices you can connect in series, make sure that the max‐
imum output current specied on the device and in the “Technical specications” chapter of the user manual is not exceeded. Only
use power cords with a cable cross-section designed for the required current intensity when connecting the devices in series.
Safety instructions
LED BARbara 16, LED BARbara 24
11
LED Bar
Bekijk gratis de handleiding van Fun Generation LED BARbara 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fun Generation |
| Model | LED BARbara 24 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2682 MB |
