Fun Generation LED BARbara 16 handleiding
Handleiding
Je bekijkt pagina 41 van 48
Symptom Remedy
The device is not working, no
light
Check the mains connection and the fuse.
No response to the DMX con‐
troller
1. If the display ashes, e.g. ‘d001’ , no valid DMX signal is
being received. Check that the DMX controller is switched
on. Check the DMX connections and cables for proper con‐
nection.
2. If the display is not ashing but there is still no response,
check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interference
to a DMX interface circuit.
Unintended light eects Make sure that the DMX channel assignments of the devices
do not overlap, and that the DMX start address of devices
with independent control is always higher by the number of
channels that have been set for the DMX mode on another
device.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Troubleshooting
LED BARbara 16, LED BARbara 24
41
LED Bar
Bekijk gratis de handleiding van Fun Generation LED BARbara 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fun Generation |
| Model | LED BARbara 16 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2682 MB |
