Fun Generation Colour Burst MKII handleiding

Niet gecategoriseerd

Fun Generation

28 pagina's

PDF beschikbaar

Handleiding

NOTICE!

Damage to the device if operated in unsuitable ambient conditions!

The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient

conditions specied in the “Technical specications” chapter of this user manual. Avoid operating it in environments with direct sun‐

light, heavy dirt and strong vibrations. Avoid operating it in environments with strong temperature uctuations. If temperature uc‐

tuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the device immediately.

Never subject the device to liquids or moisture. Never move the device to another location while it is in operation. In environments

with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualied specialists at reg‐

ular intervals to prevent damage due to overheating and other malfunctions.

NOTICE!

Damage to the external power supply due to high voltages!

The device is powered by an external power supply. The external power supply can be damaged if it is operated with the incorrect

voltage or if high voltage peaks occur. In the worst case, excess voltages can also cause a risk of injury and res. Make sure that the

voltage specication on the external power supply matches the local power grid before plugging in the power supply. Only operate

the external power supply from professionally installed mains sockets that are protected by a residual current circuit breaker (FI).

Ensure that the power cord plug is easily accessible at all times if it is the only device to safely disconnect the device from the mains

supply. As a precaution, disconnect the power supply from the power grid when storms are approaching or it the device will not be

used for a longer period.

NOTICE!

Damage to the device due to use of unsuitable external power supplies!

If the device is operated with an unsuitable external power supply, the device can be damaged by overvoltage or incorrect polarity.

If things go badly, using an unsuitable power supply can also cause a risk of injury and re. Only use the external power supply

designated for the device or an equivalent external power supply with identical parameters. If in doubt, compare the voltage speci‐

cations on the external power supply and the polarity (+/-) with the specications in this manual and printed on the device. Voltage

and polarity must always match.

Safety instructions

Colour Burst MKll

LED Flower Eect

Bekijk gratis de handleiding van Fun Generation Colour Burst MKII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.