Full Boar FBAS-010 handleiding
Handleiding
Je bekijkt pagina 12 van 17
12
KNOW YOUR PRODUCTSET UP & PREPARATION
Installing or Changing Cutting Blade
1. Unscrew the PH2 screw to remove the blade cover.
2. Lift the blade cover to expose the blade mounting system. Using a 4 mm Hex
key loosen both grub screws.
WARNING! Always ensure that the air saw is disconnected from the air
supply while installing or changing the cutting blade. Avoid contact with
the chuck and the blade immediately after use, as they can get hot. Allow
the blade to cool before touching the blade. Always inspect the blades for
chips/cracks or damaged and replace before use. Only use compatible saw
blades with proper fitment to the chuck
Bekijk gratis de handleiding van Full Boar FBAS-010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Full Boar |
| Model | FBAS-010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2332 MB |
