Full Boar FBAHR-032 handleiding
Handleiding
Je bekijkt pagina 14 van 17
14
KNOW YOUR PRODUCT
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY
Air leak near the top of
the tool or in the trigger
area.
Loose screws Tighten screws
Warn or damaged
o-rings or seals
Check and replace
O-rings
Air leak near the base of
the tool
Loose screws Tighten screws
Warn or damages
o-rings or seals
Check and replace
O-rings
Tool does nothing or
operates sluggishly
Insufficient air supply Increase air flow to tool
(Do not exceed 120psi)
Worn or damaged
o-rings
Check and replace
O-rings
Rivet will not drive
completely into the
work piece
Insufficient air supply Increase air flow to tool
(Do not exceed 120psi)
Rivets penetrate
properly during normal
operation, but won’t
drive fully at faster
speeds.
Insufficient air supply Increase air flow to tool
(Do not exceed 120psi)
Use larger air lines (3/8”
I/D minimum)
WARNING! Do not clamp or hold the trigger with anything other then
your hand.
WARNING! Do not over reach. Keep proper footing and balance at all
times.
WARNING! Always disconnect tool from pressured air supply before
loading fasteners. Only use fasteners specified in the Specifications in this
manual can be used. Keep the tool pointed away from yourself and others
at all times. Do not load fasteners with the trigger depressed.
WARNING! Do not carry tool with your finger on the trigger.
Bekijk gratis de handleiding van Full Boar FBAHR-032, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Full Boar |
| Model | FBAHR-032 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2308 MB |
