Fulgor Milano FUTO 6215 TEM handleiding
Handleiding
Je bekijkt pagina 54 van 256
EN
16
10 - System Setting
With the oven on, select the icon and confirm with the key
to enter the SETTINGS menu. This menu permits setting a number of
parameters or special functions. It also permits accessing the error
events list.
1. Press the keys to select the sub menu and confirm with the
key.
SETUP
SERVICE
2. Use this menu to change the following settings:
Press the keys to select the item to be set or to be displayed
from among the three available ones and confirm with the key.
EVENT LOGS
MAIN VOLTAGE
SYSTEM
DEMO
OM 15
Event Log
The menu permits checking any recorded errors. These codes can be
notified to the after-sales service.
01 12/11/2015 07:06 CODE: F10305
EVENT LOGS
02 17/11/2015 13:17 CODE: F10305
Demo
The purpose of this function is to set the DEMO mode, which makes the
oven useless for cooking but automatically performs a demonstration
of functions.
1. Press the keys
to select the item ON.
2. Confirm with the
key.
3. Press the
key.
After about 30 seconds, the oven starts to operate in this mode.
To temporarily stop the DEMO function, simply keep any key pressed
for a few seconds until the oven switches to standby. To start it again,
press the key.
To disable the function, enter the DEMO display page and set OFF.
Confirm using the
key.
NOTE Once set, the function remains enabled even if the oven is
disconnected from the power mains.
DEMO
ON
Bekijk gratis de handleiding van Fulgor Milano FUTO 6215 TEM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fulgor Milano |
| Model | FUTO 6215 TEM |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32268 MB |
