Fulgor Milano FUTCSO 7510 TEM Handleiding (242 Pagina's)

Handleiding

/ 242

Je bekijkt pagina 60 van 242

EN

24

17 - Oven Care and Cleaning

Oven Clean

This function performs a cleaning cycle by injecting steam into

the cavity for 15 minutes. At the end of the cycle, any crusting

that may have formed due to high-temperature cooking inside

the oven cavity, will be softened and become much easier to

remove.

ATTENTION

Once the functions have been completed, a circuit discharge

request will be sent (see WATER DISCHARGE paragraph).

Circuit Clean

This function performs a cleaning cycle of the circuit, to keep it

clean and efficient over time.

ATTENTION

Once the functions have been completed, a circuit discharge

request will be sent (see WATER DISCHARGE paragraph).

This oven is one of its kind insofar as it does not require any

descalers to keep the steam generation system running

efﬁciently.

Circuit discharge

At the end of any steam function, when the oven is turned off

using the key a circuit discharge is requested.

The following message will appear on the display: NEED TO

DISCHARGE / OPEN THE DOOR.

Open the door, watching out for the hot steam that will be

released. A new message will appear on the display with an

animated icon, requesting the user to extract the container until

the symbol indicated on the same. Press the key to start the

steam circuit discharge.

At the end of the procedure, the message DISCHARGE

ENDED / REMOVE AND EMPTY THE TANK will appear on

the display, confirming that the discharge was successful. If you

do not wish to immediately repeat a new steam cooking cycle,

it is recommended to empty the container and replace it in its

housing, then close the door.

The oven is now ready for a new cooking cycle.

/ 242

Bekijk gratis de handleiding van Fulgor Milano FUTCSO 7510 TEM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.