Fulgor Milano F7MSCO24S1 handleiding
Handleiding
Je bekijkt pagina 10 van 80
EN
8
5 - General Oven Information
Error codes
This code appears in the event of the electronic control indicating a
fault. When the error appears, the current function is blocked. If the type
of error is related to a safety function, the oven becomes unusable and
every time a start attempt is made, the same error appears (in which
case call in the after-sales service), while if the error relates to a minor
fault, after being restarted the oven can be used for the functions that
do not involve the faulty part (e.g., a heating element).
Beeps
Confirms that the command has been received after a key has been
pressed.
It also indicates that a time function has been completed (e.g. Timer or
Timed Cooking). During the execution of a recipe, an acoustic signal
warns the user that the oven is waiting for operation by the user (e.g.,
insert the dish or turn it over).
Beeps also signal an oven fault.
Default Settings
The cooking modes automatically select a suitable temperature when
the cooking mode is selected, these can be changed when a different
one is needed.
F Failure Number Codes
These codes are displayed when the electronic control detects a
problem in the oven or in the electronics.
The error code is recorded in the Error Log in the Setup menu. This
error can be communicated to the service technician so he/she can
understand the possible cause of the problem in advance.
Preheat
Whenever a cooking mode is set and the oven is heating, the preheating
starts, during this period, the instantaneous temperature is displayed
together with the thermometer icon.
As soon as the 100% is reached, the control sounds an “end of preheat”
tone and the current temperature value disappears.
Locking the keyboard
Hold the key for 3 seconds. Commands are now locked and a
“Key icon” will be displayed.
Repeat the same operation for 3 seconds to unlock the keyboard.
NOTE: The power off operation is always available.
Timer
WARNING
The timer on your oven does not turn the appliance on or off, its only
purpose is to alert you through the buzzer. When you want to turn off
the oven automatically, use the end-of-cooking or delayed cooking
function.
NOTE: Pressing the OFF button does not reset or stop the timer.
1. Press the button
and set the desired time using the arrows
and confirm with the button . To switch the selection between
hours and minutes use the arrows .
2. The time can be set from 1 minute to 12 hours and 59 minutes and,
when set, the remaining time is always visible in the bottom status
bar until the time expires or is reset.
3. To change or cancel the time set, you must reset the timer by
pressing and holding the button
for a few seconds.
4. Timer format is usually HR:MIN, switching into MIN:SEC during
the last minute.
5. When the time expires, the display shows 00:00 and the buzzer
will sound for one minute or until the button
is pressed.
Before using your oven for the first time remove all packing and foreign materials from the oven(s). Any material of this sort left inside may melt or
burn when the appliance is used.
Bekijk gratis de handleiding van Fulgor Milano F7MSCO24S1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fulgor Milano |
| Model | F7MSCO24S1 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 10221 MB |
