Handleiding
Je bekijkt pagina 33 van 40
Troubleshooting
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Having this problem? Check the following points:
No screen display
Power indicator does not light up
► Check whether changing the 0W switch on
the rear to setting 1 cures the problem .
► Check w hether the power c
able on the
monitor is connecte d co
rrectly.
► Check whether the computer is s witched on.
No screen display
Powerindicatorislit
► Check whether the computer is s witched on.
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press any key on the comp uter keyboard.
The computer may be in power saving
mode.
► Alter the brightness and/or contrast until you
get a picture.
Message: No Signal
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Check whether the computer is s witched on.
Message:
Frequency out of range:
##kHz/##Hz
Please change the display mode
to 1920 x 1200 with 60 Hz
The input signal (horizontal freq uency and
refresh rate) at the displayed input does not
correspond to the technical data for the monitor.
► Adjust the video frequency range using the
computer software (se e documentation for
the computer or display adapter).
► Set a diff
erent screen re solution using the
computer
software (see documentation for
the comp
uter or display adapter).
Picture
position not correct
The monitor recognises an unde fined mode (see
chapter "
Technical specificati on", Page 32).
► Press the
AUTO
/ button to enable
auto-adjustment of the screen.
Picture is shaking
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press the
AUTO
/ button to enable
auto-adjustment of the screen.
Picture is wrongly adjusted
► Run the Factory Rec all function in the OSD
menu.
Th
e Auto Processing message appears.
Fujitsu Technology Solutions 29
Bekijk gratis de handleiding van Fujitsu P24W-6 LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fujitsu |
| Model | P24W-6 LED |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2663 MB |
