Handleiding
Je bekijkt pagina 15 van 16
En-14
■
State of indicator lamps
: The instruction is relating to the wireless LAN control
(optional).
Lighting pattern: Off, On, Blinking, Any state
State Causes and solutions
See
page
Automatic defrosting operation
⇒
Please wait until nishing the defrosting
(maximum of 15 minutes).
10
Filter indicator
⇒
Clean the air lter and reset the lter
sign.
10
Demand response operation
7
Error code display
⇒
Consult authorized service personnel.
-
Timer setting error because of Auto restart
⇒
Reset the clock and timer settings.
10
Test run operation (for authorized
personnel only)
⇒
Press
to quit the test run.
3
The power to the wireless router is
not on.
-
⇒
Check that the power to the wireless
router is on.
There is a possibility that the W
-
LAN
adapter is not properly connected to
the wireless router.
11
⇒
Disconnect the power supply to the air
conditioner (via breaker or plug), and
then re-connect.
The software of the W-LAN adapter
is being updated.
-
During the air conditioner registration
(pairing of W-LAN adapter)
12
Restricted function
11
■
Manual Auto operation and Filter indicator
reset
You can operate the air conditioner with on the
indoor unit.
Status Length of pressing down Mode or operation
In operation More than 3 seconds Stop
Stopping 2 seconds or less Filter indicator reset
More than 3 seconds and
less than 10 seconds
Auto
More than 10 seconds
(Only for servicing.*)
Forced cooling
*:To stop the forced cooling, press this button or
on the remote
controller.
(3 times)
(Twice)
(Fast)
(Slow)
OM_9387602043.indd 14 1/28/2562 BE 9:44 AM
Bekijk gratis de handleiding van Fujitsu Lifestyle ASTH30KMTD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fujitsu |
| Model | Lifestyle ASTH30KMTD |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2707 MB |
